From size to print file
The size alone isn’t enough for the printer. Three details decide whether the file is accepted without queries.
Bleed: 3 millimetres all round
Paper shifts by a hair’s breadth when it is trimmed. To avoid a white sliver at the edge, the design is extended beyond the finished size – by 3 mm on each side at most printers. So an A1 poster is set up as 600 × 847 mm , an A2 as 426 × 600 mm.
Conversely: keep everything important – text, logo, date – at least 5 mm away from the edge. Anything too close may get cut off.
Resolution: fewer pixels than you think
The common rule “always 300 dpi” comes from small formats. For posters it quickly becomes absurd – an A0 at 300 dpi would be around 9,900 × 14,000 pixels and a file of several hundred megabytes.
What matters is the viewing distance:
- Close enough to touch (notice, menu, A4 to A3): 300 dpi.
- One to two metres away (A2 to A0 indoors): 150 dpi is enough. An A1 then needs around 3,500 × 4,970 pixels.
- From a distance (billboard, construction hoarding): 50 to 100 dpi will do. That is why large posters look coarse close up and pin-sharp from twenty metres.
Colour and format
Print files belong in CMYK, not RGB – what glows on screen turns darker in print. You supply a PDF file with embedded fonts; converting text to outlines is the safe option if the printer doesn’t have unusual fonts.
If that’s too much technical detail for you: that is exactly what I take off your hands. I set up the files print-ready and coordinate them with your printer – poster design.